Gurit offers two products suitable for filling and fairing which are available to purchase via our extensive global distributor network.
S'FILL 15 MINUTE FILLER is an epoxy filler system designed for rapid cure at ambient temperature, to allow sanding without clogging at just over an hour after application.
S-FAIR 600 is a two component filler designed for filling and fairing large composite and metal structures.
S'Fill 15 Minute Filler - Epoxy Fast Filler System
||Epoxy filler system designed for rapid cure at ambient temperature
Rapid cure and good sandability
Easy dispense and mixing
Good sag resistance during application
||1:1 mix ratio by volume and weight
S-Fair 600 - Epoxy Fairing System
||Sag resistance up to 35mm on vertical surfaces
Easy to sand
Simple 1:1 mix ratio by volume
||Typically used for the finishing of yachts
Filling and Fairing large composite and metal structures such as hulls and decks
||1:1 mix ratio by volume
100:64 mix ratio by weight