MULTI-PURPOSE EPOXY SYSTEM
- Use for gluing, coatings, laminating and filling
- Rapid curing, even at low temperatures
- Simple to use
Repair of wooden boats, plus other woodworking applications such as cabinet making and wooden moulds
Can also be used as a clear coating for wood and other substrates
SP 106 is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. With its range of hardeners, and easy 5:1 mix ratio by volume, SP 106 provides a quick and convenient way of using one epoxy system for a very wide range of tasks.
SP 106 has been established since the early 1980s as the primary epoxy system for the manufacture and repair of wooden boats, and it is now widely used in many other woodworking applications from cabinet making to the manufacture of large wooden moulds. With its extra slow hardener SP 106 can be used for jobs requiring a long working time, or in ‘tropical’ conditions of high ambient temperatures.
In its unmodified form, SP 106 can be used as a clear coating for wood and other substrates, or for laminating lightweight glass fibre fabrics such as those used for reinforcing joints. When used for clear coating, cured SP 106 should be overcoated with any good two pack polyurethane.
Adhesive / Filler Compound
By using the Gurit range of filler powders, an SP 106 resin and hardener mix can be turned into a very effective adhesive or filling compound. Details of this filler range, and how to use them, are contained in a separate information sheet (Filler Guide) and typical filling and fairing mixes (resin / hardener / filler) are shown in the SP 106 datasheet.