Other

RENUVO™ MPS UV CURING MULTI-PURPOSE SYSTEM

  • Dedicated RENUVO™ Lamp Technology
  • Suitable for use at +5°C to +30°C (+41°F to +86°F)
  • Compatible with current topcoat solutions
  • Mono-component resin technology
  • Thicknesses up to 3mm for single cure
  • Clean process avoiding mixing and contamination
  • GL Certification renewal pending
  • User friendly 310ml (10.9floz) cartridge format

RENUVO™ Multi-Purpose System (MPS), is a breakthrough UV curing resin system, developed by Gurit as a repair system for turbine blades. The system can be used either as a stand alone spot repair or in combination with RENUVO™ Prepreg for a structural repair.

RENUVO™ MPS offers a step change in materials for the repair market. With working temperatures as low as +5°C / 41°F, MPS has demonstrated a practical solution to an engineering problem, how to perform repairs quickly at these temperatures. For this reason, two specific grades of material have been formulated to give the operator the right material for both hot and cold environments.

The Mono-component RENUVO™ MPS resin eliminates the human error of mixing, dispensing and working with traditional 2 component repair systems. Additionally the material offers the operator the security that wherever the material has been sourced it is the same product manufactured to the same high exacting process.

Using a dedicated UV source, ideally RENUVO™ Lamp Technology, RENUVO™ MPS is cured in 90 seconds for a simple spot filler type repair, up to 3mm thickness. Used in combination with RENUVO™ Prepreg the MPS product acts as the perfect primer to give the perfect air free bond surface.