Prepregs

Prepreg & SPRINT™ Ancillaries

To complement Gurit’s prepreg product range, Gurit also offers co-curable ancillary products including surfacing films, adhesive films, light-weight cores, and intensifying pastes.

Product Selector

Format

System

Main Features

Lowest Cure

Recommended Processing Method

Max Tg1

Typical Applications

Adhesive Film

SA 70

  • Highly toughened resin matrix
  • Consistent bond-line thickness and weight
  • High strain to failure, high toughness
  • Excellent handling and no mixing required

16 hrs at 70°C

  • Autoclave
  • Press Moulding
  • Vacuum Bagging

110°C

Co-cure with 70°C prepregs for core and high strength adhesive bonding applications

SA 80

12 hrs at 80°C

100°C

Co-cure with 80°C prepregs for core and high strength adhesive bonding applications

Surface Films

SF 70

  • Surface film to generate a resin rich surface
  • Suitable for sub-surface applications

16 hrs at 70°C

  • Autoclave
  • Press Moulding
  • Vacuum Bagging

90°C

Co-cure with 70°C prepregs for resin rich surface

SF 80

12 hrs at 80°C

105°C

Co-cure with 80°C prepregs for resin rich surface

SF 96

  • Pinhole free surface for easy preparation and application of paint system

12 hrs at 85°C

  • Autoclave
  • Press Moulding
  • Vacuum Bagging

130°C

Co-cure with 85°C prepregs for resin rich surface ideal for sanding / priming prior to painting

SF 95VH

  • Silicon carbide filled film to generate very hard wearing surfaces

12 hrs at 85°C

  • Autoclave
  • Press Moulding
  • Vacuum Bagging

130°C

Ideal for applications that require a highly toughened system such as car body undertrays

Intensifying Pastes

SP 11100

  • Co-curable with prepreg systems
  • Compatibility of handling and processing
  • Ideal for core splicing and gap filling

16 hrs at 70°C

  • Autoclave
  • Press Moulding
  • Vacuum Bagging

75°C

Core splicing and gap filling with 70°C prepregs

SP 4832

12 hrs at 80°C

100°C

Low density, core splicing and gap filling with 80°C prepregs

SP 9435

12 hrs at 85°C

100°C

Core splicing, prevent bridging and gap filling with 85°C prepregs

Syntactic Core

SY 110

  • Lightweight drapable core material
  • Co-curable with most Gurit Epoxy Prepregs & SPRINT™
  • Fast lay-up times
  • Available at 0.7mm and 1.0mm thickness

10 hrs at 85°C

  • Vacuum Bagging

110°C

Produces ultra-light and stiff panels

For further information, please see the related documents on the side bar or contact your customer support representative.