INFUSION & WET LAMINATING DATASHEETS

Infusion & Wet Laminating - Wind Energy

• Ampreg 21 - Epoxy Wet Laminating System (v7)WE
  Ampreg 21 has been optimised for the manufacture of large composite structures using hand layup, and vacuum bagging techniques.
• Ampreg 22 - Epoxy Laminating System (v17)
  Ampreg 22 is an established and widely used laminating system. It is intended for both wet lay-up and vacuum bagging processes and uses the most up-to-date epoxy chemistry available.
• PRIME™ 20LV - Epoxy Infusion System (v7)
  PRIME™ 20LV has a much reduced viscosity resin and longer working time, which makes it ideal for infusing very large parts with complex reinforcements in one operation.
• SP 110 Epoxy Laminating System (v7)
  SP 110 is a versatile high strength epoxy laminating system which is ideal for the manufacture or repair of lightweight, high strength composites, using glass, aramid or carbon fibres.

Infusion & Wet Laminating - Marine

• Ampreg 21 – Epoxy Wet Laminating System (v7)
  Ampreg 21 has been optimised for the manufacture of large composite structures using hand layup, and vacuum bagging techniques.
• Ampreg 21FR - Fire Retardant Epoxy Wet Laminating System (v6)
  Ampreg 21FR has been optimised for the manufacture of large composite structures using hand layup, and vacuum bagging techniques.
• Ampreg 22 - Epoxy Laminating System (v17)SP
  Ampreg 22 - Epoxy Laminating System is an established and widely used laminating system.
• Ampreg 26 - Epoxy Laminating System (v11)SP
  Ampreg 26 is SP’s premium epoxy laminating system, and is particularly suitable for the manufacture of large, high performance composite structures.
• Ampreg Adhesion Promoter - Resin System (v3)
  Ampreg Adhesion Promoter (AP) is a unique resin system formulated to promote the adhesion between epoxy and vinylester resin. This allows production boatbuilders to use existing polyester gelcoats with higher performance epoxy resins
• Ampreg F230-1 Foaming Epoxy System (v1)
  Three-part foaming epoxy system which uses Ampreg 21 hardeners. Foam expands approximately 4x by volume to create a foam of 220-250kg/m3.
• Ampreg Thixotropic Pregel - Resin Additive (v2)
  Ampreg Thixotropic Pregel is a resin additive with a grease-like consistency, which can be used with a variety of hardeners from the SP laminating resin range. It is used primarily as a thixotrope - to be added to low viscosity laminating resin
• PRIME™ 20LV - Epoxy Infusion System (v9) SP-HM
  PRIME™ 20LV is the next generation of PRIME™ 20 epoxy infusion system, which is specifically designed for use in a variety of resin infusion processes
• PRIME™ 20ULV - Ultra Low Viscosity Epoxy Infusion System (v4)
  PRIME™ 20 ULV is a Ultra Low Viscosity Epoxy Infusion System with fast infusion times. It is Ideal for production boatbuilders, who want to combine the use of polyester gelcoats with epoxy backing laminates
• PRIME™ 27 Epoxy Infusion System (v3) SP-HM
  PRIME™ 27 is suitable for the female moulding of large, complex components incorporating advanced fibres such as carbon and aramid*. Typical projects include spars, hulls and reinforcing structures.
• SP 106 - Multi-purpose Epoxy System (v11)
  SP 106 is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. SP 106 provides a quick and convenient way of using one epoxy system for a very wide range of tasks.
• SP 115 Clear Epoxy Laminating System (v7) SP-HM
  SP 115 is a low viscosity, ultra-clear epoxy laminating system. It has been designed for the manufacture of laminates such as those used in sail and surfboards which are to remain unpainted, and where a very clear finish is required.

Multi-purpose

• SP 106 - Multi-purpose Epoxy System (v11)
  SP 106 is a simple to use, all-purpose epoxy which can be used for gluing, coating, laminating and filling. SP 106 provides a quick and convenient way of using one epoxy system for a very wide range of tasks.