MARINE LAMINATING DATASHEETS

• Ampreg 21 – Epoxy Wet Laminating System (v7)
  Ampreg 21 has been optimised for the manufacture of large composite structures using hand layup, and vacuum bagging techniques.
• Ampreg 21FR - Fire Retardant Epoxy Wet Laminating System (v6)
  Ampreg 21FR has been optimised for the manufacture of large composite structures using hand layup, and vacuum bagging techniques.
• Ampreg 22 - Epoxy Laminating System (v17)SP
  Ampreg 22 - Epoxy Laminating System is an established and widely used laminating system.
• Ampreg 26 - Epoxy Laminating System (v11)SP
  Ampreg 26 is SP’s premium epoxy laminating system, and is particularly suitable for the manufacture of large, high performance composite structures.
• Ampreg Adhesion Promoter - Resin System (v3)
  Ampreg Adhesion Promoter (AP) is a unique resin system formulated to promote the adhesion between epoxy and vinylester resin. This allows production boatbuilders to use existing polyester gelcoats with higher performance epoxy resins
• Ampreg F230-1 Foaming Epoxy System (v1)
  Three-part foaming epoxy system which uses Ampreg 21 hardeners. Foam expands approximately 4x by volume to create a foam of 220-250kg/m3.
• Ampreg Thixotropic Pregel - Resin Additive (v2)
  Ampreg Thixotropic Pregel is a resin additive with a grease-like consistency, which can be used with a variety of hardeners from the SP laminating resin range. It is used primarily as a thixotrope - to be added to low viscosity laminating resin
• SP 115 Clear Epoxy Laminating System (v7) SP-HM
  SP 115 is a low viscosity, ultra-clear epoxy laminating system. It has been designed for the manufacture of laminates such as those used in sail and surfboards which are to remain unpainted, and where a very clear finish is required.