MARINE PREPREG DATASHEETS

SE 70 - Low Temp Cure/High Toughness (v5)
SE 70 is a hot-melt, low temperature cure, epoxy prepreg system. It has been developed for use in the construction of large components using low energy cure cycles. Excellent properties can be achieved with a processing temperature of just 70°C.
SE 84 Nano - High Performance Prepreg (v1)
SE 84 Nano is a high performance hot-melt epoxy prepreg. When vacuum bag moulded SE 84 Nano exhibits a 20% increase in compressive strength compared to SE 84LV
SE 84LV - Low Temp Epoxy Prepreg System (v12)
Low Temperature Cure Epoxy Prepreg System, Versatile, high-strength prepreg system, Curable at temperatures as low as 80°C, Can be processed with vacuum-only processing, Excellent tack, Low viscosity - Ideal for use with heavy fibre weights can be used for faster moulding of components at 120°C.
SE 85 - Epoxy Prepreg System (v9)
The SE 85 series are toughened hot-melt, epoxy prepregs that offers an extremely good balance of mechanical properties. They are ideal for structural components where improved impact performance and resistance to resin microcracking is desired.
SE 85GT - Epoxy Prepreg System (v2)
The SE 85GT series are highly toughened hot-melt, epoxy prepregs that offer an extremely good balance of mechanical properties.

SP 4202 - Mono-component Epoxy System (v4)
SP 4202 is a single component epoxy system designed to co-cure at moderate elevated temperature with SP’s SE prepregs. The product is designed to be applied between gel coat and prepreg, and will bridge any large gaps between the two.
SP 4832 - Mono-component Epoxy System (v2)
SP 4832 is a highly thixotropic, gap filling paste. It is a single component epoxy system designed to co-cure at moderate elevated temperature with SE prepregs.

SA 70 - Epoxy Adhesive System (v4)
SA 70 adhesive film is a toughened epoxy film on a glass carrier with excellent tack and drape characteristics. It offers many advantages over traditional wet lay-up techniques for bonding of composite skins to cores.
SA 80 - Toughened Epoxy Adhesive Film (v9)
SA 80 adhesive film is a toughened epoxy film on a glass carrier with excellent tack and drape characteristics. It offers many advantages over traditional wet lay-up techniques for bonding of composite skins to cores.