Marine Reinforcement Materials from SP-High Modulus
SP-High Modulus, the marine business of Gurit supplies an extensive range of reinforcements suitable for composite component manufacture and repair. These materials are based on the most widely used fibre types and fibre orientations found in the industry, and incorporate a variety of construction techniques in their manufacture.
REINFORCEMENTS RANGE
> E-Glass Products
> Carbon Products
> Aramid Products
> Hybrid Products
REINFORCEMENTS CATEGORIES
Reinforcements are also sub-divided into the following categories, based on the orientations of the primary structural fibres:
- Unidirectional Fabrics – A variety of different weights, with the majority of fibres and weight running at 0° where optimum mechanical properties or local reinforcement is required.
- Woven Fabrics – Woven construction available in different weights and styles which include plain, twill and satin weave formations with fibres at 0°/90°
- Multiaxial Fabrics – Stitched construction, with fibres at a variety of orientations to suit different loading requirements, including +/-45° or 0°/90° (Double Bias), 0°/+45°/-45° (Triaxial), 0°/90°/+45°/-45° (Quadraxial).
- Tapes & Other Products – Narrow (<200mm) fabric versions of those listed above.
There is also a section detailing the range of shears supplied to meet the specific requirements of cutting the different fibre types.
AVAILABILITY & STOCK
The supply of dry reinforcements is subject to a minimum single roll quantity per style. Smaller quantities of fabric are available from SP-High Modulus' network of distributors, subject to cutting and handling charges. These pages show the standard range of reinforcements, which are generally available from stock. If your preferred reinforcement is not the standard range, SP-High Modulus can offer alternative weaves, weights, fibres and fibre combinations in any style. For further information and full details on all stock levels and ranges please contact the SP-High Modulus Customer Support Team.