Series 300 Adhesives Range

USED FOR: Epoxy Boats & Race Boats	CHARACTERISTICS: High strength & toughness Designed for bonding high performance epoxy laminates

> SPABOND 340LV is a high performance adhesive designed for bonding large structures such as yacht hulls and wind turbine blades. It is a cost-effective system with good thermal and mechanical properties. Spabond 340LV is available in cartridges, pails and 200 litre drums for machine mixing/dispense.
> SPABOND 345 is a toughened, high performance adhesive system ideal for bonding large structures where substrate surfaces have uneven geometry. The product has a thick, paste-like consistency, and can be applied without sag in thicknesses of over 30mm at 15°C, making it ideal where large, uneven vertical gluelines are required. The product has a 2:1 mix ratio by volume. To aid mixing, the components are pigmented to give visual indication of mix quantity. Spabond 345 is available in 400ml cartridges, pails and drums.
> SPABOND 368 is a low density adhesive, with a simple 2:1 by volume mix ratio which is designed for bonding a wide range of core materials. The product is uniquely filled and can be applied in thicknesses of up to 6mm at 20°C on vertical surfaces without the risk of drainage. Resin and hardener are both pigmented to give a visual indication of mix quality. Spabond 368 is easy to sand and can be used for strip planking with wood or foam strips.
> SPABOND 370 teak deck adhesive has been formulated to give the optimum mechanical and working properties for bonding teak decking to a composite hull. Spabond 370 is non-corrosive, solvent free and cures at room temperature. When cured, Spabond 370 is tough, highly adhesive and very strong and generates green strength rapidly (does not require post curing).

Related Datasheets & Downloads