Industrial Prepreg & SPRINT™ Materials
Gurit’s range of high industrial prepreg products were developed for the cost-effective manufacture of very large structures such as wind turbine blades using heavyweight reinforcements and low-cost chemistry.
Product Selector
Format
|
System
|
Main Features
|
Fastest Cure
|
Recommended Processing Method
|
Max Tg1
|
Typical Applications
|
Prepreg
|
Sparpreg™
|
- UD prepreg ideal for thick structural sections
- Excellent handling & processing properties – no de-bulk
- Fully compatible with Gurit SPRINT™ and prepreg products
|
45 mins at 120°C
|
- Autoclave
- Press Moulding
- Vacuum Bagging
|
125°C
|
High quality monolithic unidirectional Components that require fast single shot production in thick sections
|
Prepreg
|
WE 91-1
|
|
45 mins at 120°C
|
- Autoclave
- Press Moulding
- Vacuum Bagging
|
125°C
|
Large Structural components such as wind turbine blade shells and shear webs
|
WE 91-2
|
- Medium tack epoxy prepreg
|
Prepreg
|
WE 92
|
- Medium tack epoxy prepreg
- Cost effective for large structures
|
45 mins at 120°C
|
- Autoclave
- Press Moulding
- Vacuum Bagging
|
125°C
|
Large Structural components such as wind turbine blade shells and shear webs
|
SPRINT™
|
WT 93
|
- Low tack SPRINT™ resin matrix
- Dry fabric enables efficient air evacuation
|
45 mins at 120°C
|
- Autoclave
- Press Moulding
- Vacuum Bagging
|
125°C
|
Large Structural components such as wind turbine blade shells, shear webs, spars and roots
|
Sparpreg™
SparPreg™ is an advanced diuron-free UD prepreg, developed to enable to economic manufacture of unidirectional spar caps for more demanding spar designs. SparPreg™ is specifically formulated to produce low void content unidirectional prepreg from vacuum bag only processing.
WE 91-1 / WE 91-2
The WE91 diuron-free prepreg product range comprises of two tack variants; WE91-1 high tack and WE91-2 medium tack prepregs. WE91 is a high flow epoxy prepreg ideally suited to structural composite component manufacture. It can be cured at temperatures as low as 85°C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C. WE91-2 isdesigned for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.
WE 92
WE 92 is a high flow, diuron-free epoxy prepreg ideally suited to the manufacture of thick sections. It can be cured at temperatures as low as 85°C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C. All of this can be achieved together with an out-life of 60 days at 21°C.
WT 93
WT 93 is a diuron-free SPRINT™ resin system that can be cured at temperatures as low as 85°C, but can also be used for the rapid manufacture of components through its 45-minute cure at 120°C. All of this can be achieved together with an out-life of 21 days at 21°C. WT 93 is designed for vacuum bag processing and offers excellent mechanical performance on glass and carbon fibre reinforcements.
Gurit’s innovative WT 93 SPRINT™ product range uses a high flow, low tack epoxy prepreg and is ideally suited to the manufacture of thick sections such as turbine blade roots or spars.
For further information, please see the related documents on the side bar or contact your customer support representative.